In The Introduction Of Window Cleaning Machine Not Long Ago, We Talked About The Track Type Window Cleaning Machine. Today We Are Going To Talk About The Horizontal Track Type Window Cleaning Machine. After We Finish The Introduction, You Can Also Compare Them To See If They Have Any Similarities And Differences, Which Is More Conducive To Our Study And Use. When We Design The Horizontal Track Window Cleaner, We Should Pay Attention To The Following Aspects: 1. We Need To Consider The Forces Caused By Huake Mechanical Window Cleaner In Many Aspects. 2. When Designing The Guide Rail Base, It Should Be Consistent With The Modulus Of The Building, And The Space For Concrete Pouring And Drum Beating Should Be Flowed Out. 3. Do Not Let The Support Points Of The Track Be Dense, Their Spacing Should Not Be Less Than 1.5m, And Pay Attention To Their Direct Large Load. 4. In Terms Of Strength, It Is Necessary To Ensure That The Accessories For Track Estimation And Connection Can Bear At Least 2 Times Of Rated Load. It Is Also Necessary To Prevent Corrosion Of Rails, Connecting Accessories And Anchors. 5. The Temperature May Affect The Access Of The Track, So It Is Better For Us To Use Small Cross-section Materials Where The Temperature Difference Is Large, Which Can Reduce The Temperature Difference. 6. Groove Welding Shall Be Used To Connect The Joints Outside The Track, And A Galvanized Steel Plate With Width Not Less Than 20 Mm, Length Not Less Than 200 Mm And Thickness Not Less Than 12 Mm Shall Be Welded At The Bottom Of The Track. The Key Point Of The Horizontal Track Window Cleaner Is The Above Points, And I Hope You Will Remember Them A Lot, Which Is Good For Us To Use The Horizontal Track Window Cleaner For Operation In The Future. If Necessary, You Can Come To Huake Machinery For Consultation.