Fastener Is The Connection Between Two Parts In The Electric Basket, So Its Quality Is Closely Related To The Safety Of The Basket. Generally, The Fasteners We Use Are Not All The Same, But There Are Some Differences. Let's Introduce The Basic Knowledge Of Several Commonly Used Fasteners. One Is The Rotating Fastener, Which Is Mainly Used For The Connection Between The Fasteners On The Electric Basket. It Can Be At Right Angles To The Steel Pipe, At Any Angle Or At The Same Time. When Using, It Is Necessary To Fully Contact The Arc Surface Of The Inner Wall With The Steel Pipe Wall, And Then Fasten It With T-bolt. Generally, The Torque Of The Fastening Bolt Is 40n. M. If We Use The Rotary Fastener In The Electric Basket, It Will Be More Convenient For Us To Use When We Operate It. In Addition To The Electric Basket, The Surface Quenching Of Gears, Crankshafts, Rollers And Other Workpieces Will Also Be Applied, Mainly To Improve The Wear Resistance And Anti Fatigue Breaking Ability Of These Workpieces. The Other Is Bowl Buckle, Which Is Easy To Connect And Suitable For All Kinds Of Plane And Facade Buildings And Structures. The Fastener Is Mainly Composed Of Two Sub Fasteners, And The Small End Of The Lower Fastener In Each Sub Fastener Is Connected With The Movable Joint Bolt, And The Large End Is Connected With The Upper Fastener With The Notch And Thrust Surface. At The Same Time, The Two Sub Fasteners Are Connected By Rolling Rivets And Rotated At Any Angle. We Can Pay Attention To The Fasteners Of The Electric Basket To See If They Are The Same As The Above. If There Are Any Other Questions, We Will Give You A Satisfactory Answer.