Today, Xiaobian Specially Collected Some Relevant Information About The Hoist On The Internet. Through The Introduction Of The Safe Operation Procedures Of The Hoist, She Hopes To Give Some Guidance And Suggestions To The Friends Who Want To Buy The Hoist. 1. The Elevator Shall Be Maintained And Managed By The Designated Personnel, And The Key Of The Power Switch Box Shall Be Managed By The Designated Personnel. 2. The Hoist Must Be Equipped With A Winch Limiter And A Travel Limiter. The Limiter Shall Enable The Pulley To Stop Automatically When It Is Lifted To A Distance Of 300 Mm From The Drum Or Pulley. The Action Is Sensitive And Reliable, And The Trial Hoisting Is Carried Out. 3. The Hoist Shall Be Marked With Heavy Load, And The Weight Shall Not Be Overloaded (1t) During Lifting And Landing. 4. After Power Transmission, Check Safety Devices Such As Winch Limiter, Travel Limiter And Interlock Switch. 5. Before Lifting And Landing, The Vehicle Can Be Started Only After The Alarm Is Sounded. 6. The Hoist Shall Never Be Allowed To Carry People Up And Down. 7. After The Completion Of The Work, The Lifting Plate Of The Hoist Shall Be On The Ground, Then The Power Supply Shall Be Cut Off And The Upper And Lower Guardrail Doors Shall Be Closed. 8. Always Keep The Environment Around The Elevator Clean.